What’s the worst nightmare of every car driver? It’s most probably getting stranded on the road due to an overheated engine. With modern cars, engine overheating is not a regular occurrence. However, if your car engine overheats, do you know how to manage such a situation?
While it might be tempting to ignore it and keep on driving, but don’t do that unless you’re fine risking complete engine rebuild.Here’s what you should do for dealing with overheating engine:
1)Get off the road and park in a safe spot because it will take some time to troubleshoot it. You don’t want to be parked in a dangerous spot where a vehicle might hit you.
2)Do not open the bonnet until few minutes. Let the engine cool down a bit before you start messing around the engine bay. What’s worst than the overheated engine? Getting burnt face if the hot coolant splashes on you.
Things to inspect for overheating engine
After waiting for the engine to cool down, check the coolant level in the reservoir. Coolant is what keeps the engine cool and if that’s low then I guess you found the problem.
To top off the coolant level, you need to open the cap of the reservoir. But be careful while you do that. The system will most likely be highly pressurized even after letting it cool. Open the cap slowly, gripping it with a cloth. Just before all the screws on the cap are undone, some steam will escape. Hold it there, let the pressure reduce before you completely open the cap. Now, fill with coolant (or Water if antifreeze is not available) till the top mark.
Inspect Coolant Hoses
检查冷却液软管以查看是否正确固定。甚至较小的裂缝或建筑物high oil pressureon the tubing could cause loss of coolant. If Coolant level was not Low then move onto the next thing.
How to troubleshoot it? Whenever an electrical unit fails on a car, the first thing you should check is the fuse box. Every car manual has a fuse box chart. Refer it to find the fuse associated with the radiator fan, pull it out and inspect to see if that’s not blown.
Commonly, a thermostat might fail and this would not turn on the radiator fan at the temperature it’s required to. To check this, start the engine, and keep it running until the engine temperature crosses the ideal temperature. If the radiator fan does not turn on then that’s the problem.Symptoms of faulty thermostat
Radiator Fan Wires & Relay
Check the fan wires next. Start with unhooking the two wires, positive and negative going into the fan motor. They should have 12 volts of current, so check that with a voltmeter. You can even use a taillight bulb from the emergency kit to check if there’s current in the wire. If there is, then your fan motor is bad. But if you don’t have current in the wires, your next suspect should be the fan relay.Motorcycle engine cooling method varies
如果发动机运行瘦，则该发动机也可能过热（燃烧室中的燃料比燃料更多）。由于O2传感器变质，引擎可能会运行精益，fuel filter blockage, or air intake modification.
Low engine oil pressurecould also result in excessive engine heat.
Listen to what Scotty has to say:
Hopefully, you were able to diagnose the issue and fix it by now. If not then your best bet is to get your car towed. And let the professional mechanic sort it out for you. Always keep these things in your car: emergencyrepair kit, flashlight, water (both for you and the car), and food.